Shenzhen computer gongs processing of six basic problems have?

Shenzhen computer gongs processing of six basic problems have? Shenzhen computer gongs processing complicated shape workpiece, process, use too many different kinds of cutting tool, often after a clamping to complete from roughing and semi-finishing to finish all the process. So the program is more complex. To consider the following problems when programming. A, carefully analyze the drawings and determine the reasonable technology route. Second, the size of shenzhen computer gongs processing cutting tool is to choose the right, and to measure the actual size of the fill in the tool. Third, to determine the reasonable cutting parameter. Mainly spindle speed, turning back, feed speed, etc. Four, should leave enough space for automatic tool change, in order to avoid collisions with workpiece or fixture. Shenzhen computer gongs machining tool change position suggested Settings in the origin of the machine tool. Five, for ease of inspection and commissioning procedures, each working step of processing content can be arranged to different subroutines, and the main program mainly complete the tool change and subroutine calls. This program is simple and clear. Six, check out the good programming and commissioning, pay attention to the cutting tool, jig, or whether there is interference between parts. In the check function, M, S, T can be conducted in the Z axis locked state. If you want to know more information about the shenzhen computer gongs processing, welcome to click into our company's website https://www. henryparts。 com/