Nc machine tools in the batch processing precision machinery parts
, especially pay attention to the accuracy of precision machining, to ensure the accuracy in the batch process we should pay attention to what issues?
Here is to introduce to you from the following three aspects: one, the batch parts machining accuracy is poor, is usually due to install, the axis between feed according to the dynamic error is not set, or due to the use of wear and tear, machine tools have changed the shaft transmission chain.
Can pass to adjust and modify clearance offsets to solve.
When the dynamic tracking error is too large and alarm, can check: servo motor speed is too high.
Position detection components are in good condition.
Position feedback whether cable connector contact is good.
The corresponding analog output latch, gain potentiometer are in good condition.
The corresponding servo drive is normal.
2, machine tool movement overshoot caused by machining accuracy is not good, may be added, deceleration time is too short, time can be appropriately extended speed variation.
May also be a servo motor and the connection between the screw loosening or poor rigidity, can reduce the position loop gain appropriately.
Three, two axes linkage of roundness error (
Circle the axial deformation of the deformation could be the result of a mechanical not adjusted.
Axis positioning accuracy is bad, or improper screw clearance compensation, leads to quadrant generated roundness error.
Inclined elliptic error at this time should first check the shaft position deviation.
If the deviation is too big, can adjust the position loop gain to exclude.
Then check that the rotating transformer or inductosyn interface board is good, then check whether mechanical transmission pair clearance is too large, clearance compensation is appropriate.
The point for NINGBO HENRY PARTS INC. is that managerial processes are as important as other inputs in production and can create significant competitive advantage.
NINGBO HENRY PARTS INC. serves a wide variety of professional markets and industries across the globe. Contact us at HENRY PARTS to find the you have always dreamt of.
The risk of mechanical parts manufacturer is reduced by mechanical parts manufacturer with the consumption of .
NINGBO HENRY PARTS INC. who primarily serve our consumers need to consider offering their products in an mechanical parts manufacturer such as SERVICE to take advantage of the growing interest from consumers in supporting mechanical parts manufacturer.